semifinished

Shock-resistant transparent material, lightweight and resistant to ultraviolet light. Self-supporting thanks to alveolus rooms inside, which also play an acoustic and thermal insulation.

Crystalline polymer also called Polyethylene Terephthalate. mai features Excellent dimensional stability and low coefficient of friction makes it an effective material where there is a need for high sliding speed and wear resistance. Of superior quality compared to other polyester, it is flame retardant and certified for contact with food(metodo UL94).

Made of resin and sheets of pure cotton fabric. It features excellent electrical and mechanical resistance, remains unchanged up to 120° C, and also a good chemical inertia. It can not be fused and is insoluble in common solvents and reagents; on the other hand it can be attacked by strong acids and caustic alcohols.

POM acetal resin (Poly Oxy methylene blue) with high values of mechanical strength, toughness, hardness, rigidity, dimensional stability due to low moisture absorption, thermal stability, a good electric and dielectric behavior, excellent sliding properties and reduced value of static and dynamic friction.

Polyamide polymer, with an excellent cost/performance ratio, and General characteristics.Good resistance to mechanical stress and wear. You can find it cast, extruded, or loaded with various materials. It has high tensile strength and compression. It is not suitable to work in humid as it is a hygroscopic material.

Semicrystalline thermoplastic with high mechanical and thermal characteristics (up to 240° C). On-load and creep resistant to wear, low friction coefficients. Heat resistance without load is high but is significantly reduced under load, though. It features excellent dimensional stability, good resistance to chemical agents, and good electrical insulation. Unstable to U.V. rays.

Plexiglass is a thermoplastic acrylic. It is more transparent and durable than glass, light, elastic, non-inflammable and non-conductive. Resistant to mechanical stress and chemical and weathering agents, working mechanically with normal cold equipment. Cold gluing, soldering and cementing; hot bending.

Very similar to Plexiglas, it has the ability to be cold bent. It has an absolute impact resistance, high dielectric characteristics and excellent dimensional stability.

Absolute impact resistance, high dielectric characteristics and excellent dimensional stability.

Odorless and non-toxic polymer, similar to polyethylene. Polypropylene has good surface hardness, resistant to chemical agents attacks such as inorganic salts, dilute mineral acids and bases and concentrated, even at high temperature; on the other hand, it is attacked by halogens, nitric acid oxidizing very active agents.

There are several types of polythene in relation to their molecular weight and characteristics vary accordingly. The molecular weight is between 300 000 and 1 million molecules. Excellent impact resistance with decrease, sorption labour power and high speed of stress and fracture toughness at high and low temperatures depending on the molecular weight and on stress over time.

The chemical properties are excellent, acids, alcohols and solvents do not attack. It is an excellent insulating material and electrical and dielectric properties are particularly favourable. It has a very low coefficient of friction both dynamic and static moisture absorption is almost nil. It deforms when put under load, but it resumes the form itself, removing the load, if raised the temperature to 300° c. It is also found in various types of loads (fiberglass, graphite, bronze, stainless steel) which obviously modify some properties.

PVC is a material that can be found in hard format, flexible, with good mechanical resistance values, high chemical inertia even in the presence of oxidants such as nitric acid, excellent dielectric properties which make it a good insulator. Limited thermal resistance: only 60 °C in continuous operation. It can be glued with glues containing solvents. It has little moisture absorption that the dimensional stability.

Partially fluorinated polymer with high performance. Resistant to acids, good dimensional stability and strength. Low coefficient of friction and good abrasion resistance. It has a good resistance to ultraviolet rays and low flammability.

Silicone is a very soft elastomer. It provides excellent resistance to high temperatures from 180° C to 200° C, but it is resistant to 300° C tips. It remains flexible even at -100° c. Even mechanical, electrical characteristics, and chemical resistance, except for many organic solvents, remain intact.

Closed cell silicon sheet with filmed surfaces, suitable for contact with food. Upon request, customer designed

EPDM

Vetronite or Epoxy Glass is made from multiple layers of fibreglass fabric, which are stacked, impregnated with a resin at high temperatures, and plates in their final outlook. It comes in sheets of varying thickness, and is also available in tubes.